background image

IMPORTANT SAFETY INFORMATION

Please read this manual in its entirety before operating your Bushnell POWERSYNC product. It contains 
important information concerning the setup, operation and maintenance of the product. Keep this 
manual for future reference. 

• 

WARNING: This product should only be used with the supplied charging unit and accessories 
(not included with all models). Use of a charger or accessories not recommended or supplied by 
Bushnell may result in product damage, fire, electrical shock or injury, and will void your product 
warranty.

• 

CAUTION: Do not use the product to charge an external device at the same time as the internal 
battery is being charged by the AC wall charger.

• 

CAUTION: Do not operate the product in an environment where temperatures exceed 112

F/45

C

• 

CAUTION: Do not submerge the product in water, or attempt to operate the product after it has 
been exposed to water.

• 

CAUTION: Do not attempt to open the product. There are no user serviceable internal parts. 
Disassembling the product will void your warranty. The rechargeable battery must be replaced 
by a qualified technician.

• 

CAUTION: Check adaptors for correct fit and compatibility before using the product to charge 
electronic devices. Improperly used adaptors can be a shock hazard and may damage the 
electronic device.

• 

CAUTION: Before operating the product or connecting it to any other device, check to ensure that 
all cables are not damaged. Extreme heat, water, petroleum products and sharp edges all have 
the potential to damage cables. Do not use any cable with exposed wiring.

• 

CAUTION: Charge your connected devices in an area away from the direct sun if possible.

• 

WARNING: EXPLOSION HAZARD! - Do not incinerate any Bushnell POWERSYNC product, or 
attempt to use it in a microwave oven.

• 

WARNING: Bushnell POWERSYNC products are not intended for powering any medical 
equipment, life support devices, or any other critical equipment.

• 

CAUTION: Do not clean your Bushnell POWERSYNC product with anything other than a damp rag. 
The use of cleaning chemicals or other products may harm the unit and will void your warranty.

• 

Do not dispose of any Bushnell POWERSYNC product as you would normal household trash. 
Please contact your local government authority for directions regarding the proper disposal of 
products containing a Lithium Ion battery.

PACKING LIST

This POWERSYNC model includes the following items:

•  BatteryCharger (Model PP2020 or PP2010)
•  USB Cable 
•  AC Wall Charger
•  4 NiMh AA Batteries (Model PP2010 only)
•  Quick Start Guide

AC Wall Charger 

with USB cable connected

1

Summary of Contents for PowerSync PP2020









Reviews: