Bushnell Equinox Z 260500, Instruction Manual

Page: 4 / 76

4
QUICK START GUIDE
(Please Refer to “PARTS & CONTROL GUIDE” - Next Page)
1) LOAD BATTERIES (for more details, see pg. 9)
The battery compartment is below the IR light housing.
Unscrew IR light (D) counterclockwise and insert batteries.
2) REMOVE LENS COVER, POWER ON (for more details, see pg. 9)
The power switch (N) is on the underside, between the eyepieces.
Hold the switch down until the Bushnell logo appears in the display.
3) ADJUST IPD (EYEPIECE SPACING) (for more details, see pg. 9)
To adjust the spacing between the eyepieces, push/pull the eyepieces (M),
or turn the small knob (P), so they are closer together or farther apart.
4) TURN ON IR (INFRARED) LIGHT (for more details, see pg. 10)
At night or if needed, press the
Ir
button (C).
5) FOCUS (for more details, see pg. 10)
First, rotate each eyepiece (M) until the LCD displays (icons or edges) are in focus.
Next, turn the center focus knob (L) until your subject appears sharp.
ENGLISH