Bush WM2760DAB, Instruction Manual

Page: 29 / 56

Using your Stereo Flat Micro System
29
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021 .
Using your Stereo Flat Micro System
Let’s get started
• Signal error
This is displayed as a number between 0-99. It would not be possible to satisfactorily
listen to a radio station with a signal error rate of 30 or above. Try adjusting the aerial
or relocating your radio to improve reception.
• Signal information - The data rate at which the signal is being transmitted.
1. Repeatedly short press the Menu button on the Micro or the remote control to cycle
through the different information options.
Dynamic range control (DRC)
In DAB mode:
The dynamic range for each radio programme is set by the broadcaster for each radio
station and may be different for the types of programme broadcast, such as pop or
classical music or a chat show. The dynamic range control signal is transmitted in parallel
with the audio signal for each programme and with your Micro you can use this control
signal to expand or compress the dynamic range (the difference between the loudest and
quietest sounds) of the reproduced audio signal. Changing the dynamic range can affect
the ‘loudness’ and/or ‘quality of sound’ of the programme that you hear so that it will be
more suited to your listening conditions and your own personal listening requirements.
e.g. in a noisy environment, where quiet sounds might be swamped, setting the
compression to maximum will ‘boost’ the quiet sounds, whilst keeping the loudest sounds
at their original level.
There are 3 levels of compression:
• DRC off: No compression. This is the default setting.
• DRC low: Medium compression.
• DRC high: Maximum compression.
1.
Long press the Menu button on the Micro or on the remote control. Use the or
buttons on the Micro or the or buttons on the remote control to scroll to
DRC. Short press the Select button.
2.
Use the or buttons on the Micro or the or buttons on the remote
control to scroll through the options available and short press the Select button.