Bush WM2760DAB, Instruction Manual

Page: 21 / 56

Getting to know your Stereo Flat Micro System
You’ll be up and running in no time
Getting to know your Stereo Flat Micro System
21
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021 .
1.
Long press the Menu button on the Micro or on the remote control. Use the or
buttons on the Micro or the or buttons on the remote control to scroll to
System. Short press the Select button.
2. Sleep is displayed. Short press the Select button.
3.
Use the or button to cycle through the available options, stop when the
sleep time you would like is displayed and short press the Select button.
4. Sleep is displayed. Short press the Menu button to exit form the Menu options.
Note: To cancel the sleep time, follow the steps to set the sleep time but stop when
Off is displayed in Step 3 and short press the Select button.
Using the alarms
Set an alarm
Note: Check that your Micro has the correct time before you set an alarm. Please
remember to use 24 hour clock.
1. Long press the Menu button on the Micro or on the remote control. Use the or
buttons on the Micro or the or buttons on the remote control to scroll to
System. Short press the Select button.
2. Sleep is displayed. Use the or buttons on the Micro or the or buttons
on the remote control to scroll to Alarm. Short press the Select button.
3. Alarm 1 is displayed. You can use the or buttons on the Micro or the or
buttons on the remote control to scroll and set Alarm 2, if required. Short press
the Select button.
4. The hour digits will flash. Use the or buttons on the Micro or the or
buttons on the remote control to set the hour for your alarm. Short press the Select
button.
5. The minute digits will flash. Use the or buttons on the Micro or the or
buttons on the remote control to set the minutes for your alarm. Short press the
Select button.