Bush NE-6005, Instruction Manual

Page: 14 / 15

USING HEADPHONES (not included)
A stereo headphone jack has been provided so that the set can be used
without disturbing others. Plug in the headphones at the point marked ‘ ’
and adjust the listening volume to your chosen level. Excessive sound
pressure from earphones and headphones can cause hearing loss. The
speakers will not operate when earphones are fitted.
RESET
1. If moving the radio to another location in the country the pre-tuned and
stored DAB stations may no longer be available and it will be necessary
to reset the radio back to the factory settings.
2. With the unit switched on, press and hold the
MENU button and press
TUN/CH
▼
/
▲
buttons until the display shows ‘System’ and press the
SELECT button and continue press TUN/CH
▼
/
▲
buttons until the
display shows “Factory Reset <No> Yes’ and press
TUN/CH
▼
/
▲
buttons to “<Yes>” and press the SELECT button. (F.15), (F.16)
3. The radio will display “Restarting….” and will then go into standby mode.
Note: All stored programmed stations will be lost during reset.
BACKLIGHT
The product display has a backlight with three brightness setting, Low/
Medium/ High with the unit switched on, press and hold the
MENU button
and press
TUN/CH
▼
/
▲
buttons until the display shows ‘System’, press the
SELECT button to confirm. Press TUN/CH
▼
/
▲
buttons until the display
shows “Backlight” and press the
SELECT
button to cycle through
“High/Medium/Low” and press the SELECT button to confirm the setting.
F.15
System
< Factory reset >
F.16
Factory reset ?
< No > Yes
13