Bush LE-28GX01, Installation & Operating Instructions Manual

Page: 13 / 44

11
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Remove the battery cover on the back of the
remote control, gently push down and pull
backwards at the same time as shown.
Insert two AAA/R3 or equivalent type batteries.
Ensure the batteries are inserted the correct
way and replace the battery cover.
Note: When the remote control is not going to
be used for long periods of time, the batteries
should be removed. Otherwise the remote
control may be damaged, caused by battery
leakage and corrosion.
Getting Started
Switching the TV On
With power cord plug connected to the mains
power socket and TV in ‘
Standby ’ mode.
To switch the TV on from standby mode, either:
a: The Remote control; Press the “ ” button.
b: The TV; Press the “ ” button at the right
of the TV.
Switching the TV Off
Either press the “ ” button on the remote
control or press the “ ” button at the right
of the TV, the TV will then switch to standby
mode.
AAA/R3 X2
Batteries
Remote control -
Inserting batteries
Switching the TV On and Off
LE-28GBR-A HD 黑色 （英国 SY13096）_IM V01.indd 11 2013-5-3 11:26:05