Bush DLED65UHDHDRS, Instruction Manual

Page: 44 / 64

Alexa Ready
Alexa is Amazon’s cloud-based voice service available
on many voice controlled assistant devices. Your TV
is compatible with and ready to be utilized with Alexa
devices.
Works With Alexa
By means of the Works With Alexa feature you can control
the functions of your TV with Alexa devices. In order to do
this, the setup process should be completed. The setup
can be carried out by using the
Works With Alexa
option
in the Settings>System menu.
Setup process
The wizard will guide you through the setup process.
• On the first screen you will be informed about the
feature. Highlight
Start
and press
OK
to proceed.
• An authentication code will be created and displayed
on the screen. Use your computer or any other device
with internet access to go to the internet address (URL)
shown on the screen. You will be directed to a page
where you can sign in to your Amazon account first, if
you are not already signed in. Then you will be directed
to a page where you can enter the authentication code
you see on the TV and link your TV to your Amazon
account.
• If the linking process was successful you will be asked
to determine a name for your TV, called ‘Friendly
Name’(
FN
). A ‘Friendly Name’ is a name that reminds
you of your TV, such as ‘Living Room TV’, ‘Kitchen TV’,
‘Dining Room TV’, etc. Choose an easy-to-say name.
You will say this name to tell Alexa which TV to control.
When you are done, highlight
OK and press OK .
• Examples about the use of the feature will be displayed
on the next screen. Press
OK to finish the setup.
Once the setup is complete, you will be able to control
the functions of your TV with Alexa.
Note: Make sure that the devices are connected to the
internet.
Example Commands
Here are some voice commands that you can use:
Command Function
Alexa, turn on ‘ FN ’ Powers on the TV
Alexa, turn off ‘ FN ’ Powers off the TV
Alexa, play ‘
FN
’ Starts media playback
Alexa, pause ‘
FN
’ Pauses media playback
Alexa, resume
‘FN ’
Resumes media playback
Command Function
Alexa, stop ‘ FN ’ Stops media playback
Alexa, fast forward
on ‘
FN ’
Advances media in fast forward
mode
Alexa, rewind on
‘
FN
’
Rewinds media
Alexa, set the
volume of ‘
FN
’
to 50
Sets the volume to the
specified level
Alexa, turn the
volume up on
‘
FN
’
Increases volume by 10 units
Alexa, turn the
volume down
on ‘
FN ’
Decreases volume by 10 units
Alexa, mute ‘ FN ’ Mutes sound
Alexa, unmute
‘
FN ’
Unmutes sound
Alexa, change
the input to
“input_name” on
‘
FN ’
The TV switches to the input
source with the specified
name (e.g., HDMI 1)
Alexa, change
channel to
"channel_
number" on ‘
FN ’
The TV switches to the channel
with the specified number
(e.g., channel 200)
Alexa, change
channel to
“channel_name"
on ‘
FN
’
The TV switches to the channel
with the specified name
Alexa, channel up
on ‘
FN ’
The TV switches to the next
higher channel, if any available
Alexa, channel
down on ‘
FN ’
The TV switches to the next
lower channel, if any available
Alexa, next
channel on ‘
FN ’
The TV switches to the next
channel on the channel list
FN is the abbreviation for ‘Friendly Name’.
Advanced features
Getting the most from your TV
Advanced features 42
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,