Bush DLED65UHDHDRS, Instruction Manual

Page: 14 / 64

Switching On/Off
To Switch the TV On
Connect the power cord to a power source such as a
wall socket (220-240V AC, 50 Hz).
To switch on the TV from standby mode either:
• Press the
Standby
button,
Pro/-
or a numeric
button on the remote control.
• Press the control button on the TV.
To Switch the TV Off
• Press the Standby button on the remote control.
• Press the control button on the TV, the function options
menu will be displayed. The focus will be on the Standby
option. Press and hold the button for about 2 seconds
to activate this option. The icon colour of the option will
change. Then press the button once again, the TV will
switch into standby mode.
To power down the TV completely, unplug the power
cord from the mains socket.
Note:
When the TV is switched into standby mode, the
standby LED can blink to indicate that features such as
Standby Search, Timer is active. The LED can also blink
when you switch on the TV from standby mode.
Getting to know your TV
You’ll be up and running in no time
Getting to know your TV
12
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,