Bush DHG60GNSS, Instruction Manual

Page: 32 / 37

Product support
Help is always at hand
Product support 32
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Troubleshooting
If the hob is not working:
• Hob burners do not work.
• The burners may be in the ´off` position.
• Supply gas pressure may not be correct.
• Power (if the appliance has an electric connection) is switched off.
• Check the position of oven and/or grill burner’s control knob.
• Check the gas supply and gas pressure.
• Check whether there is power supplied. Also check that other kitchen appliances are working.
Hob burners do not light.
• Burner cap and crown are not assembled correctly.
• Supply gas pressure may not be correct.
• LPG cylinder (if applicable) may be depleted.
• Power (if the appliance has an electric connection) is switched off.
• Ensure the burner parts have been placed correctly.
• Check the gas supply and gas pressure.
• LPG cylinder may need replacing
• Check whether there is power supplied. Also check that other kitchen appliances are working.
Flame colour is orange/yellow.
• Burner cap and crown are not assembled correctly.
• Different gas compositions.
• Ensure the burner parts have been placed correctly.
• Due to the design of the burner, the flame can appear to be orange/yellow in certain areas of the burner.
• If you operate the appliance with natural gas, city natural gas may have different compositions. Do not operate
the appliance for a couple of hours.
Burner is not igniting or only partially lighting.
• Burner parts may not be clean or dry.
• Ensure that parts of the appliance are dry and clean.
Burner sounds noisy.
• This is normal. The noise may reduce as they heat up.
Noise
• It is normal for some metal parts on the cooker to produce noise when in use.
If you still have any problems with the issues above after trying the required steps, then please call in an authorised