Bush DAB30, Instruction Manual

Page: 17 / 27

Using your DAB/FM Radio with Bluetooth
Let’s get started
Using your DAB/FM Radio with Bluetooth
Let’s get started
Using your DAB/FM Radio with Bluetooth
Using your DAB/FM Radio with Bluetooth
32
33
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021 .
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
6. Use the Tune/Select rotary control to scroll to the hour for the alarm and press the
Tune/Select rotary control to select.
7. The minutes will now flash. Use the Tune/Select rotary control to scroll to the minutes
for the alarm and press the Tune/Select rotary control to select. The duration time will
now flash.
8.
Use the Tune/Select rotary control to scroll to the duration for the alarm. You can
choose from 15, 30, 45, 60 and 90 minutes. Press the Tune/Select rotary control to
select. The source for the alarm will now flash.
9.
Use the Tune/Select rotary control to scroll to the sound source for the alarm. You
can choose from Buzzer, DAB or FM. Press the Tune/Select rotary control to select.
Note: If you select DAB or FM radio for the alarm source, ‘Last listened’ will flash in the
display. Press the Tune/Select rotary control to select and the last listened to radio
station in DAB or FM, as appropriate, will be used for your alarm.
10. Use the Tune/Select rotary control to scroll to the frequency for the alarm. You can
choose from Daily, Once, Weekends or Weekdays. Press the Tune/Select rotary
control to select.
Note: If you select ‘Once’, you will then be prompted to set the date for your alarm.
11. Use the Tune/Select rotary control to set the volume for your alarm. Press the rotary
Tune/Select control to select.
Note: Remember to set the alarm radio volume to one that will wake you. The alarm
volume will increase progressively until it reaches the alarm volume you have set.
12.
‘Alarm 1 Wizard’ is displayed again, together with ‘Alarm Off (or On)’. Use the Tune/
Select rotary control to choose ‘Alarm On’ or ‘Off’ and press the Tune/Select rotary
control to select. ‘Alarm Saved’ is displayed.
13.
In Standby mode a bell symbol in the top right of the display, together with the digit ‘1’
or ‘2’ as appropriate, will confirm when an alarm has been set.
Note: If the time is not set or has failed to update from the radio signal, ‘Time is not set’
will be displayed when you try to set the alarm. The radio will then prompt you to set
the time. An alarm can only be set after the time has been set.
Stop the Alarm
When the alarm sounds, press and release the Power button, ‘Alarm off’ is displayed.
Alternatively, you can press and release the Snooze button (see Snooze function below).
Note: If you press the Power button to stop the alarm, the alarm symbol will remain in
the display and the alarm will sound again at the same time the next day, unless it was
set for ‘Once’ only.
Snooze
When the alarm sounds you can press and release the Snooze button. ‘Snooze 5 minutes’
will be displayed, followed by the snooze time countdown, until the alarm sounds again.
Turn off the Alarm
Follow the steps for ‘Setting an Alarm’ and select ‘Off’ in step 12.
Sleep timer
You can set your radio to turn off automatically using the sleep timer. You can choose
from Sleep off, 15, 30, 45, 60 and 90 minutes.
In DAB or FM mode:
1. Press and hold the Menu/Info button to enter the menu options.
2. Use the Tune/Select rotary control to scroll to ‘System’. Press the Tune/Select rotary
control to select.
3. Use the Tune/Select rotary control to scroll to <Sleep>. Press the Tune/Select rotary
control to select.