EN
5
5.
To listen to preset radio stations, press
MEM
repeatedly to select the
desired radio station.
DUAL ALARMS OPERATION
Before setting the alarm time, make sure the Clock has been set.
Setting Alarm 1 or Alarm 2
1. In standby mode, press and hold
AL1 /
AL2
for 2 seconds.
The hour and minute digits will flash.
2. While the hour and minute digits are flashing, set the alarm time by repeatedly
pressing
HR
and
MIN
respectively.
Press and hold
HR
and
MIN
respectively for fast advance.
3. Repeatedly
press
AL1 / AL2
to set the alarm to wake to buzzer or radio.
The corresponding indicator light(s) will illuminate on the display.
Checking alarm time
Press and hold
AL1
/
AL2
for 2 seconds, the alarm time will flash on the
display.
To turn off the alarm
,
press
POWER
and the alarm will come on again at
the set time on the following days.
To cancel the alarm,
repeatedly press
AL1 / AL2
until the alarm indicator
light goes out on the display.
Snooze function
This function can be used to stop the alarm temporarily for about 9 minutes
once the alarm is activated. When you press
SNOOZE
, the buzzer or radio
alarm sounds will stop and sound again after about 9 minutes.
SLEEP TIMER OPERATION
The sleep function is designed to automatically turn off the Radio.
Setting sleep timer
1. Press
SLEEP
.
“90” will illuminate on the display.
2. Repeatedly press
SLEEP
to select the desired sleep time from 90, 80, 70,
60, 50, 40, 30, 20 or 10 minutes.
3. The radio will be turned off after the selected time has elapsed.
To check remaining sleep time
,
press
SLEEP.
To cancel sleep timer,
press
SLEEP
until “OFF” is
