EN
4
2.
Whilst the display is flashing, repeatedly press
HR
and
MIN
respectively
until the desired clock time appears.
Press and hold HR and MIN respectively for fast advance.
3. Press
SET
to confirm.
The hour and minute digits will stop flashing.
POWER ON/RADIO MODE
Press
POWER
to switch the unit on and enters the radio mode.
The radio frequency will briefly appear on the display and then return to
clock time.
RADIO OPERATION
1. Press
POWER
to turn on the radio.
The default FM frequency or the last frequency
you tune the radio to.
The default FM radio frequency is 87.5 MHz.
2. Press
BAND
once to enter the AM radio mode.
The default AM radio frequency is 522 kHz.
3. Repeatedly
press
BAND
to select the desired radio band.
4.
Adjust the volume by repeatedly pressing
VOLUME
/
.
5. Repeatedly
press
TUNING
/
to tune into the desired station.
Press and hold
TUNING
/
for about 2 seconds and then
release the button, the unit will scan the frequencies until a
broadcasting station strong enough for good reception is found.
NOTE:
For the best FM reception, extend the FM aerial to its full length.
For the best AM reception, rotate the unit to the position giving best
reception.
PRESETTING YOUR FAVOURITE RADIO STATIONS
Up to 10 FM and 10 AM radio stations can be preset.
1.
Follow steps in "RADIO OPERATION" and tune into the station that you
wish to preset.
2.
Press and hold
SET
for about 2 seconds, “P01” will
flash on the display.
3. Press
SET
again to store the station.
4.
Repeat steps 1 to 3 to store desired stations.
