background image

EN 

 

WARNINGS 

 

This appliance is intended for domestic household use only and should 
not be used for any other purpose or in any other application, such as for 
non domestic use or in a commercial environment. 

 Ventilation 

Allow at least a 10 cm gap all around the product. 

 

The ventilation should not be impeded by covering the ventilation 
openings with items, such as newspapers, table-cloths, curtains, etc. 

 

No naked flame sources, such as lighted candles, should be placed on 
the apparatus. 

 

To protect the environment, use local recycling facilities for battery 
disposal. 

 

This apparatus is not suitable for use in a tropical climate. 

 

The apparatus shall not be exposed to dripping or splashing and that no 
objects filled with liquids, such as vases, shall be placed on the 
apparatus. 

 

Batteries (battery pack or batteries installed) shall not be exposed to 
excessive heat such as sunshine, fire or the like. 

 

Where the MAINS plug or an appliance coupler is used as the 
disconnect device, the disconnect device shall remain readily operable. 

 

The marking plate is located at the bottom of the apparatus. 

 

 

Battery handling and usage   

 

Only adults should handle battery. Do not allow a child to use this 
apparatus unless the battery cover is securely attached to the unit. 

 

 

The exclamation point within an equilateral 
triangle is intended to alert the user to 
presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance 

 

 

The lightning flash with arrow-head symbol, 
within an equilateral triangle, is intended to alert 
the user to the presence of un-insulated 
"dangerous voltage" within the product's 
enclosure that may be of sufficient magnitude to 
constitute a risk of electric shock. 

 

 
Warning: to reduce the risk of electric shock, do not remove cover (or back). No user serviceable 
parts inside, refer servicing to qualified service personnel.

 

Summary of Contents for CR-200PL









Reviews: