Page 4
HOW DO I CONNECT THE CDVB52 TO MY TV SET?
1:
Put the
CDVB52
on a firm, level surface with at least
10
centimetres gap around all the sides and close to
the
TV
you are going to connect it to.
2:
Turn off the mains socket your
TV
is plugged into or
pull the plug out of the socket.
3:
Take the antenna coax cable and connect it to the
ANT IN
connector on the back panel of the
CDVB52
.
4:
Connect a scart connector at each end
(not supplied)
between the
SCART-TV
socket on the back panel of
the
CDVB52
and the Scart socket on your
TV
, if there
is more than one Scart connector on the
TV
, look in
your
TV
instruction manual to check which one you
should use.
5:
Plug the mains lead into the mains socket.
6:
Plug the
TV
back into the mains socket.
NOTE:
The CDVB52 will not work if you do not have
the scart-to-scart cable connected.
RECORDING FROM THE CDVB52
1:
Connect as described to the left.
2:
Using a second scart cable connect the
SCART-VCR
output on the rear of the
CDVB52
to the
SCART
input
on a
VCR
or recording device.
RECORD ONE CHANNEL AND WATCH ANOTHER
1:
Should you have a
TV
with a built in decoder you can
watch a different channel to the one you are recording
by adding a coax cable from the
LOOP OUT
socket
on the rear of the
CDVB52
and into the
ANTENNA
input on your
TV.
You can then record the channel
broadcast through the
CDVB52
and watch something
else on the
TV
decoder.
WATCH A CONNECTED VCR
1:
Press the
VCR
button to switch the input to a
connected
VCR
player. Press again to switch back to
the
CDVB52
input.
User instructions
Making the connections
If you have damaged or missing parts,
call the Customer Helpline: 0870 600 3030
VIDEO RECORDER
ANTENNA IN RF cable
LOOP OUT RF cable
VCR Scart Cable
Television
TV Scart Cable
