Alarm Duration, Snooze Function and Radio Setup
5
Alarm duration
Alarm Duration - B
l
eep alarm or radio alarm will continue output for 30 minutes if no button is pressed, then it will
stop automatically until the same alarm time on the next day.
Snooze function
When the alarm has been activated, press the Snooze button (5) for snooze function, Beep alarm or Radio alarm
will stop for 9 minutes. The alarm can then either be switched off or the Snooze button pressed again.
- Snooze will continue for 9 minutes unless the ON/OFF button (1) or the Source button (2) ) is pressed.
Sleep mode
While listening to the radio, press the Sleep button (5) to enter sleep mode. Adjust the sleep duration from
10 to120 minutes by pressing the Sleep button (5). The radio will automatically turn off after the selected time.
Dimmer control
While in standby mode, you can adjust the brightness of the LED clock display using the DIMMER button (5).
1. There are two settings, high and low. Low level is the default setting.
2. The higher setting will consume more power.
Listening to FM radio
Press the POWER ON-OFF button (1) to turn the unit on. Press SOURCE button (2) to select FM radio play mode,
turn the Set Knob to tune radio to a preferred station. If you press and hold the SKIP FORWARD button (9) or SKIP
BACK BUTTON (7) button for one second, then release, the unit will automatically scan to the next receivable FM
radio station. Press the POWER ON-OFF button (1) to turn the radio OFF.
To set / recall the radio presets
Press the POWER ON-OFF button (1) to turn the unit on. Press SOURCE button (2) to select radio play mode, turn
the Set Knob to tune radio to a preferred station. If you press and hold the SKIP FORWARD button (9) or SKIP BACK
button (7) for one second, then release, the radio will automatically scan to the next receivable FM radio station.
Press the Memory/ button (8); “P01” will blink in the display.
Press the Memory/ button again to set the preset.
You can now scan for other stations and save up to 9 more stations using the above process.
When “P01-P10” is flashing, press the SKIP FORWARD button (9) or SKIP BACK button (7) to select the preset number.
When recalling preset stations, press the button (8) to select the preset number.
Note :
Ensure that the FM antenna is completely unrolled and extended for the best FM reception.
