BR40DAB
- 9 -
Initial scan
When your radio is switched on for the first time the scanning display will be shown
while the scanning process takes place:
The radio scans all usable stations(full scan)and stores them alpha numerically-1 Radio,
2 Radio, AA Radio, AB Radio...
The initial scan will take a few minutes. After the scan, the clock will be set and the radio
will play the first station in the sequence. To browse for another station, refer to the next
section.
Scanning 34
Progress bar
Number of stations found
Browsing For a Station
To browse for another DAB+ station:
Press the or button repeatedly on the unit or Remote control.
The stations in the station list will be displayed in sequence.
Press the button until you find the station you want.
Press the
SELECT
button to select the displayed station.
After a short delay, the radio will tune to the station.
Adjusting The Volume
To increase the volume:
Press
VOL+ /
to increase the volume.
The volume level will increase.
To decrease the volume:
Press
VOL- /
to drcrease the volume.
The volume is adjusted the display will change to show the current volume setting on
a bargraph.
