BR40DAB
- 14 -
More Detail Of The DAB+ Settings Menu Options:
Autoscan:
Select Autoscan to re-scan the entire DAB+ band and refresh the station list.
Manual Tuning:
Manual tuning enables you to search the band manually by pressing
the or button to step through the multiplex numbers and check if any have usable signal
strength on a bargraph display. Manual tuning is not necessary in normal operation
where scanning will have automatically established a station list of all usable stations.
More Detail Of The System SUB-MENU Options:
Sleep:
Select this option to set a sleep time in the range 15-90 minutes. When a sleep
time is set, the radio will set To Standby after the sleep delay time. Choose 'Sleep Off'
to cancel sleep mode.
Alarm:
Select this option to set alarm times and activate one or both of the dual alarms.
There are more details of alarm setting on the following page.
Time:
Select the time option to set the clock manually. This may be useful if you are in
an area where it is not possible to receive DAB+ radio broadcasts. Within the time menu
options it is also possible to change the clock display format between 12 and 24 hour,
to choose whether the clock should set from the DAB+ time signal (Auto update) and to
change the format of the time and date display.
Display Setting:
Select "Display set" then the "Active Backlight" sub-option to
change the backlight brightness. Press < or > to adjust the brightness level.
Press Select to enter the Standby Backlight sub-option. Press < or > to adjust the
brightness level during Standby Mode.
Factory Reset:
Select the 'Yes' sub-option to reset all the settings of your radio to factory
original settings. The station list will also be cleared and any stored preset memories will
be erased. After a factory reset the radio will re-scan the band and renew the station list.
SW VERSION:
This option will display the version number of the control software currently
installed in your radio. This will be helpful to a technician who is servicing the radio.
DAB+ Settings Menu
