BR40DAB
- 16 -
Alarm 1 Wizard is now displayed.
The alarm is now set in the sequence shown on this page.
NOTE:
Press the
MENU
button at any time to exit alarm setting, leaving the settings
unchanged.
To make a change to a setting:
1. Press the or button to scroll through the options available for a setting (or times
when clock setting).
2.When you have finished changing a setting, press the
SELECT
button to confirm the
setting and to the next setting in the sequence.
3. Repeat the previous two steps to change each setting as required.
*NOTE:
- When changing the Alarm radio preset setting, wake to the last station you
played before setting the radio to Standby.
Saving alarm settings:
Your alarm settings are automatically saved
when you complete the last setting and press
the
SELECT
control.
Waking to the alarm:
Once you have set the alarm with your required
time and wake-up mode,set the radio to Standby.
If the alarm is active, the alarm symbol will show
on the display .
Alarm 1 On/Off
Choose to set Alarm 1 On or off
Alarm 1 Time
Set the alarm hours, then minutes
Alarm 1 Duration
Set the duration of the alarm
Alarm 1 wake-up mode(Source)
Choose from DAB+,FM,iPod,Buzzer
Alarm 1 Volume
Set the volume for Alarm 1
Alarm Saved
The alarm settings have been saved
Setting the Alarm:
Switch on the radio (Alarm settings cannot be changed when set to Standby).
Press the
ALARM
button on front panel.
'Alarm Status Set' will appear on the display.
Press the
SELECT
button instead of '
SELECT
control' to begin setting Alarm 1 or
press the button before selecting to choose Alarm 2 setup.
Setting The Alarms
Setting The Alarms
You can set two completely separate alarm times (ALARM 1 and ALARM 2) and activate
either or both of them to wake you with a buzzer or radio.
The alarms are set from within the 'Alarm' option of the Settings Menu.
NOTE:
- You must complete all settings before leaving the menu or your changes won't
be saved.
