Bush BFSSAE12B, Instruction Manual

Page: 35 / 39

3 5
Product support
Help is always at hand
Automatic Fault Warnings
Product support
e any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
section of these instructions, ou requir If y
or online at XXXCVTITVQQPSUDPN If you still require further assistance, call one of our experts on .
The installation and repairing procedures should always carried out by the Authorised
Service Agent in order to avoid possible risks. The manufacturer shall not be held liable
for damages that may arise from procedures carried out by unauthorised persons.
Repairs may be carried out by technicians only. If a component has to be replaced,
ensure that only original spare parts are used.
Improper repairs or use of non-original spare parts may cause considerable damage
and put the user at considerable risk.
Contact information for your customer service can be found on the back of this
document.
Function-relevant genuine spare parts according to the corresponding Ecodesign order
can be obtained from Customer Service for a period of at least 10 years from the date
on which your appliance was placed on the market within the European Economic
Area.
TROUBLE
CODE
POSSIBLE FAULT WHAT TO DO
F5
Insufficient water
Make sure the water inlet tap is open and water is
flowing
Separate the inlet hose from the tap and clean
the filter of the hose.
Contact for service if the error continues.
F3
Continuous water
input
Close the tap and contact for service.
F2
Inability to discharge
water
Water discharge hose and filters may be
clogged.
Cancel the program.
If the error continues, contact for service.
F8
Heater error
Contact for service.
F1 Overflow
Unplug the machine and close the tap.
Contact for service.
FE
Faulty electronic
card
Contact for service.
F7 Overheating Contact for service.
F9 Divisor position error Contact for service.
F6 Faulty heater sensor Contact for service.