Bush BFSSAE12B, Instruction Manual

Page: 21 / 39

2 1 Functions
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at
www.bush-support.com
If you still require further assistance, call one of our experts on
0345 257 7271
.
Functions
Simple everyday use
The Control Panel
Changing a programme
When you want to change the program
while a washing program is running on.
Press Start/Pause button.
Once the program has stopped,
use the program selection button
to select the desired program.
Press the Start/Pause button to
start the newly
selected program.
The newly selected program will
continue in the place of the
previous program.
Cancelling a programme
If you would like to cancel a program while
washing is continuing.
Press and hold the Start/Pause
button for 3 seconds.
End light will flash during the
cancelling process. The
machine will drain the water
inside for about 30 seconds.
After After the End light has become
press the On/Off button
to switch off the machine.
Unplug the
appliance. Turn off
the water tap.
NOTE: Do not open the door until the
program finishes.
NOTE: At the end of the washing
program, you can leave the door of the
machine ajar to speed up the drying
process.
NOTE: If you open the door of the
machine or if power gets cut during the
washing cycle, the program will resume
once the door has been closed or the
power has recovered.