Getting started
04
6
Put batteries in the remote control
Open the battery cover of the remote control and put
two size AAA batteries so that the ‘+’ and ‘-’ marks
on the batteries match the ‘+’ and ‘-’ marks inside
the remote control. Replace the battery cover.
1
2
3
Plug in and switch on
Insert the digital box mains plug into a mains
socket. The standby light on the front will come
on.
Switch your TV on, and then press the standby
button on your digital box remote control.
The easy install screen
The first time installation screen will appear on
screen.
If the signal strength is above 50% press the
[OK]
button on your remote control to continue
the setup.
Follow the instructions on screen to complete
the setup.
Make sure that your digital box has been installed correctly before
continuing the installation.
92%
If signal strength is less than 50% please check the dish
position and cable connections.
Press to Continue
Network ID
Transport ID
Signal Strength
BFSAT02SD IB-Rev3-140709.indd 7
14/07/2009 09:25:52
