background image

Ignition of the burners

To determine which knob controls which burner, 

check the position symbol above the knob.

Manual Ignition of the Gas Burners

    If your appliance is not equipped with any 

ignition aid or in case there is a failure in the 
electricity network, follow the procedures listed 
belo

w.

    

For Hob Burners:

 To ignite one of the burners, 

press and turn its knob counter-clockwise so 
that the knob is in max. position, approach a 
match, taper or another manual aid to its upper 
circumference. Move the ignition source away 
as soon as you see a stable flame. 

    

For Oven Burners:

 To ignite the oven burner, 

press and turn the oven control knob counter-
clockwise so that the knob is in max. position, 
approach a match, taper or another manual aid 
to the ignition hole that is located on the front 
left corner of the burner. Move the ignition 
source away as soon as you see a stable flame.  

    

For Grill Burners:

 To ignite the grill burner, turn 

the grill valve in the clockwise position until the 
marker on the knob points at the grill sign. 
Then, keep the knob pressed and approach a 
match, taper or another manual aid to the holes 
that are situated on the burner. Move the 
ignition source away as soon as you see a 
stable flame.  

Ignition by Spark Button

    Press the valve of the burner you want to 

operate and turn the valve in the counter-
clockwise direction so that the knob is in max. 
position and with your other hand, press the 
ignition button at the same time. Press the 
ignition button immediately, because if you wait, 
a build up of gas may cause the flame to 
spread. Continue pressing the ignition button 
until you see a stable flame on the burner. 

1. 

2. 

IMPORTANT 

- Flame safety device:

.

Oven / Grill Burners

.

Hob Burners

 

Hobs equipped with flame failure device provide 
security in case of accidentally extinguished 
flame. If such a case occurs, the device will block 
the burners gas channels and will avoid any 
accumulation of unburned gas. Wait 90 seconds 
before re-igniting an extinguished gas burner

Regardless of the model of your appliance, all 
oven burners are equipped with a gas safety 
device. For this reason, during ignition, keep the 
oven knob pressed until you see stable flames. If 
the flames are cut out after you release the knob, 
repeat the procedure again. If the oven burner 
does not ignite after you keep the burner knob 
pressed for 30 seconds, open the oven door and 
do not attempt re-ignition for at least 90 seconds. 
When oven flames go out accidentally, repeat the 
same procedure

8

User Instructions

Customer Helpline 

0345 257 7271

Using the hob

Summary of Contents for AG56D





















Reviews: