Bush 9511143, Instruction Manual

Page: 41 / 68

Connectivity
Wired Connectivity
To Connect to a Wired Network
• You must have a modem/router connected to an active
broadband connection.
• Connect your TV to your modem/router via an Ethernet
cable. There is a LAN port at the rear (back) of your TV.
2
3
1
1. Broadband ISP connection
2. LAN (Ethernet) cable
3. LAN input on the rear side of the TV
• You might be able to connect your TV to your LAN depending
on your network’s configuration. In such a case, use an
Ethernet cable to connect your TV directly to the network
wall outlet.
1
2
1. Network wall socket
2. LAN input on the rear side of the TV
Configuring Wired Device Settings
To configure wired connection settings go to the
Settings>Network
menu.
Network Type
Set Network Type as Wired Device if you are connecting
via an Ethernet cable.
Internet Speed Test
Highlight
Internet Speed Test
and press the
OK
button.
TV will check the internet connection bandwidth and
display the result when complete.
Advanced Settings
Highlight
Advanced Settings
and press the
OK
button.
On the next screen you can change the IP and DNS
settings of the TV. Highlight the desired one and press Left
or Right button to change the setting from
Automatic
to
Manual
. Now you can enter the IP and / or DNS values
manually. Select the related item in the drop down menu
and enter the new values using the numeric buttons of
the remote. Highlight
Save
and press the
OK
button to
save settings when complete.
Other Information
The status of the connection will be displayed as
Connected
or
Not Connected
and the current IP address,
if a connection is established. The MAC address of your
TV will also be displayed on the screen.
Wireless Connectivity
To Connect to a Wireless Network
• You must have a wireless modem/router connected to an
active broadband connection.
1
1.
Broadband ISP connection
A Wireless-N router (IEEE 802.11a/b/g/n) with simultaneous
2.4 and 5 GHz bands is designed to increase bandwidth.
These are optimised for smoother and faster HD video
streaming, file transfers and wireless gaming.
The frequency and channel differ depending on the area.
The transmission speed differs depending on the distance
and number of obstructions between the transmission
products, the configuration of these products, the radio
wave conditions, the line traffic and the products that
you use. The transmission may also be cut off or may get
disconnected depending on the radio wave conditions,
DECT phones or any other WLAN 11b appliances.
The standard values of the transmission speed are the
theoretical maximum values for the wireless standards.
They are not the actual speeds of data transmission.
The location where the transmission is most effective
differs depending on the usage environment.
Advanced features
Getting the most from your TV
Advanced features 39
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line .