Bush 915/3219, Instruction Manual

Page: 14 / 24

14
Check that your Radio is in FM radio mode. When your radio is in
FM mode it can receive Radio Data System or ‘RDS’ information if
this is being transmitted by the broadcaster. RDS information will
often include the station name, detail about the programme and
the current time.
Tuning to an FM station
Note: Plug the earphones supplied into the headphone socket on
the end of the pocket radio. The earphones also work as the radio
aerial and so these need to be connected when you scan for FM
radio stations
In FM mode:
1. Press, hold and then release the ‘Tune +’ button to scan up the
frequency band. Press, hold then release the ‘Tune –‘ button to
scan down the frequency band. ‘Scanning…’ will be displayed
and your radio will search for the next available station and then
stop on that station.
2. Press and release the ‘Tune –‘ or ‘Tune +’ button to fine tune
each frequency in 0.05MHz steps, if necessary.
Changing the scan setting
In FM mode:
1. Press and hold the ‘Select’ button. ‘Switch To DAB’ is displayed.
2. Press and release the ‘Tune –‘ or ‘Tune +’ buttons to scroll to
‘<Scan setting>’.
3. Press and release the ‘Select’ button. . There are now two
different options to choose from and the current setting will
have an ‘*’ next to it.
• Strong stations - the scan will only stop when a strong signal
strength is received which should also result in a better audio
quality.
Using the FM radio