Product support
Help is always at hand
Product support
43
or online at
www.argos-support.co.uk
If you still require further assistance, call one of our experts on
0330 024 0805.
(Calls are charged at the standard rate of your network provider).
Connecting your TV to your Sky box (when your Sky box is located in a different room to the TV)
Option 2)
Please note, if you are adding a ‘Magic Eye/TV Link’ to your system so that you can use your Sky remote control to
change the Sky channel in the room where the 2nd TV is located, please refer to the instructions included with the
TV link/magic eye in order to ensure the RF or RF2 output on your Sky box is powered on. (The red LED light on
the TV link/magic eye will light up if the RF/RF2 output is correctly set up) If you do not have the instructions that
came with the TV link/magic eye, instructions on how to do it can be found on our website.
1)
To tune the TV to the Sky box, on the 2nd TV, select the ‘Analogue’ input source.
2)
Select the channel that you wish to store the Sky box/channel on. (If you do not use channels 1-5 because you
no longer have analogue terrestrial channels after digital switchover, you may choose to select channel 1 to store
the Sky box/channel, if you still have and use analogue channels 1-5, you may for example decide that channel 6 is
the best option for you)
3)
Press the corresponding number on the remote control to select the desired analogue channel chosen as per
point 2 above.
4)
On the TV remote control, press Menu. Now navigate through the menus to select Manual Tuning or Analogue
Manual Tuning (refer to the Tuning/Channel menu section of this user guide if necessary)
5)
Manually tune in the channel (usually, the Sky box is at a frequency between 800Mhz and 850Mhz) once the Sky
box/channel is found, press ‘OK’ to store it. If you wish to use your Sky remote to operate the TV’s functions, you
will need a Sky remote control (Revision 9 or later) and you will need to program a 4 digit code into it.
If you wish to use your Sky remote to operate the TV’s functions, you will need a Sky remote control
(Revision 9 or later) and you will need to programme a 4 digit code into it.
RF/COAX cable from
Sky Box to 2nd TV
Connect to RF
or RF2 output
on the Sky box
Connect to the
Aerial/RF input
on the 2nd TV
TV Link/Magic Eye
(optional)
2nd TV in
another room
Sky Box
SCART
or HDMI
cable
User Guide - BUS-MAN-0026 BUSH 40-133F -40-133Z-WB-11B-FGKUS-UK.indd 43
User Guide - BUS-MAN-0026 BUSH 40-133F -40-133Z-WB-11B-FGKUS-UK.indd 43
04/12/2015 15:15:34
04/12/2015 15:15:34
