9
For any help concerning set up and use of your TV please call the
Customer Helpline: 0871 2000 463
To complete the stand installation you will require a cross head screw driver.
The
Stand Installation pack comes with 2 sets
of screws.
fi g 1)
Attach the stand neck to the rear of the TV set.
fi g 2)
Secure the neck to the TV using the
3 x M (4x12) screws provided.
fi g 3)
Attach the stand base to the neck.
fi g 4)
Secure the base to the neck using the
4 x ST (4x12) screws provided.
Attaching The Stand
HELPFUL ADVICE FOR FIRST TIME STAND INSTALLATION
When securing the self-tapping screws into the base of the stand (on fi rst installation) the screws will
be naturally tight as they are creating a thread in the plastic of the stand neck in order to support a TV of
this size.
a)
Ensure the cross head screw driver tip fi ts correctly into the head of the screw and that it is not too big
or small.
b)
Screw in all screws individually and partially before tightening all of the screws individually and partially
until they are fully inserted.
c)
If they become very tight try loosening them slightly and then re-tightening them once again as this will
continue the process of creating the thread for the screws.
4
x ST(
4x12
)
3 x
M (4x12)
1
1/2
4 x ST (4x12)
1
2
3
4
3
x M(
4x12
)
User Guide - BUSH - 22-207F, 22-207FDVD, 24-207F, 24-207FDVD,W,P,S BUS-MAN-0011.indd Sec1:9
User Guide - BUSH - 22-207F, 22-207FDVD, 24-207F, 24-207FDVD,W,P,S BUS-MAN-0011.indd Sec1:9
8/8/2014 11:57:18 AM
8/8/2014 11:57:18 AM
Summary of Contents for 22/207F
Page 30: ...BUS MAN 0011 ...
