Bush 170/4680, Set-Up & Operating Instructions, Page: 12 / 20

12
iPod/iPhone/iPad mode
Check that your Bluetooth
speaker is in iPod mode. The
LED indicator ring will be green
colour in iPod mode.
If you are not already in iPod
mode, briefly press and release
the ‘Volume/Standby’ knob, until
you are in iPod mode.
Note:
Your Bluetooth speaker has
an Apple lightning connector.
The lightning connector
works with iPhone 5, iPad (4th
generation), iPad mini, iPod
touch (5th generation and iPod
nano (7th generation).
Dock your iPod/iPhone/iPad
Note: If you use a cover with your
iPod/iPhone/iPad, please remove
it before attempting to dock your
product.
1. Lift up the cover on the top of
the Bluetooth speaker to reveal
the iPod/iPhone/iPad dock
connector.
2. Line up the connector on the
bottom of your iPod/iPhone/iPad
with the dock connector on the
top of the Bluetooth speaker and
push down to connect.
The dock will begin to charge
your iPod/iPhone/iPad, if
necessary. Charging will stop
automatically when your iPod/
iPhone/iPad is fully charged
(check your iPod/iPhone/iPad
display).
Note: Care should be taken when
connecting your iPod/iPhone/
iPad to the dock connector to
avoid damage. Please ensure to
line up your iPod/iPhone/iPad
with the dock connector before
pushing down.
Playing your iPod/iPhone/iPad
You can use the controls on your
iPod/iPhone/iPad to play the
music through the Bluetooth
speaker, when it is docked.
Note: If there is no audio input
for 10 minutes the Bluetooth
speaker will go to standby mode
automatically. You can press and
hold the ‘Volume/Standby’ knob
to switch the Bluetooth speaker
back on.
Remove your iPod/iPhone/iPad
1. Hold the Bluetooth speaker
steady with one hand and pull up
your iPod/iPhone/iPad with the
other hand, until it is clear of the
dock connector.
iPod/iPhone/iPad mode