Bush 170/4680, Set-Up & Operating Instructions, Page: 10 / 20

10
Bluetooth (BT) mode
Check that your Bluetooth
speaker is in Bluetooth mode.
The LED indicator ring will be
blue colour in Bluetooth mode.
If you are not already in
Bluetooth mode, briefly press
and release the ‘Volume/Standby’
knob until you are in Bluetooth
mode.
Connecting or ‘Pairing’ with
your Bluetooth speaker
In Bluetooth (BT) Mode:
1. On your speaker the LED
ring around the outside of the
volume control will light up and
flash blue quickly whilst trying
to connect with other Bluetooth
devices.
Note: If a device has not been
‘paired’ or connected with
your Bluetooth speaker after 5
minutes, the blue LED indicator
will begin to flash slowly. Press
and hold the ‘Volume/Standby’
knob to go to Standby mode
and then press and hold again
to switch back on. The LED
indicator will begin to flash blue
quickly again.
2. On the device that you would
like to connect to your Bluetooth
speaker via Bluetooth (e.g.
iPhone/iPad/Android/other
phone/Computer), turn on
Bluetooth connectivity and
ensure that it is ‘discoverable’.
Note: If necessary, refer to the
instructions for your device to
add or set up Bluetooth
.
3. Select to ‘Add new device’, if
necessary.
Note: Some products will
automatically search for a new
device and so the ‘Add new
device’ option is not available.
4. When found, your Bluetooth
speaker will be displayed as
‘BUSH Audio’. Select the device
name to begin pairing.
5. When pairing is complete the
LED indicator around the volume
control will stop flashing and will
remain on.
6. Now that you have paired
your device with the Bluetooth
speaker, it will connect to it when
it is within range, which is about
10 metres or less (33 feet or less),
line of sight.
Bluetooth mode