Bush 135873546, Instruction Manual

Page: 16 / 35

16
Using your DAB/FM Radio
Let’s get started
USING THE RADIO - DAB MODE
DAB differs from analogue radio; the separate signals from a number of stations are grouped
together and transmitted as a single frequency. These groups are referred to as multiplexes and
ensembles. Each time a group has been found the name of the group will be shown on the lower
half of the display.
DAB MODE - AUTO TUNE
This function allows the radio to search automatically for DAB Band III channels.
1. In DAB mode, press and hold the MENU / INFO button until ‘Full scan’ (fig.3) is displayed
and press the SELECT button accept. The radio will start to scan,
the display will show ‘Scanning’, together with a slide bar (fig.2) that
indicates the progress of the scan and the number of stations found
so far.
2. When the scan is finished the radio will return to the station played
before the scan was initiated but any new stations found will have
been added.
DAB MODE – MANUAL TUNE
This function allows a specific or new ensemble to be manually added to
the stations already available on the radio.
1. In DAB mode, press and hold the MENU / INFO button and turn the
SCROLL knob until ‘Manual tune’ (fig. 4) is displayed. Press the SELECT
button to accept.
2. Turn the SCROLL knob until the desired frequency (e.g. fig. 5) is shown
in the display and then press the SELECT button. The top line will
now display the channel number, the frequency and name of the
ensemble and the lower line will show the signal strength or ‘service
not available’ if the signal strength is too weak.
3. Press the SELECT button again to add the ensemble and automatically
tune to the station.
DAB MODE – PRUNE
This function allows all unavailable stations to be removed from the station list. Press and hold the
MENU / INFO button for about 2 seconds to enter the tuning menu.
1. Turn the SCROLL knob until ‘Prune’ is displayed and press the SELECT button to confirm.
2. Use the SCROLL knob to highlight <yes> and then press the SELECT button again to confirm
and delete. If <no> is selected the operation will be cancelled.
fig.4
fig.5
fig.3