![background image](http://html1.mh-extra.com/html/bush-hog/ms250g/ms250g_operators-manual_2834867024.webp)
Operating Instructions
MS250G, MS500G, MS800G, MS500P, MS800P
Compact Manure Spreader
24
8.3 Stopping in an Emergency
If an emergency occurs:
1.
Stop forward movement.
2.
For PTO-drive models, disengage the PTO. If available,
activate the tractor's emergency PTO shutoff.
3.
Turn off the tow vehicle engine.
4.
Correct the condition that caused the emergency before
starting the equipment.
8.4 Pre-Operation Checklist
For personal safety and to maintain good mechanical condition
of the manure spreader, complete the following pre-operation
checks before each use.
Area to Check
Check that the machine is properly hitched. Make
sure that the retainers are installed on the mounting
pins.
Check for and remove any manure or other material
that is entangled in the spreader.
Check that the manure spreader was lubricated,
as specified in the
Check that the beater-bar and drive system move
freely.
Check the tire pressure. If required, inflate the tires to
the pressure that is noted on tire sidewall.
Check that all covers and shields are in place. Make
sure that they are secure.
Check the tightness of all fasteners. Make sure that
your equipment is working and in good repair.
Make sure that the operator is wearing the
appropriate PPE, such as a hard hat, safety eyewear,
safety footwear, safety vest, hearing protection, and
gloves.
Make sure that the operator is not wearing loose-fitting clothing or
jewelry, and that long hair is tied back.
8.5 Machine Break-In
Although there are no operational restrictions on the manure
spreader when it is used for the first time, it is recommended
that the following mechanical items be checked:
After 1–5 hours of operation:
•
Check that the apron chain and drive system move freely.
•
Check that the beater-bar and drive system move freely.
•
Check all nuts, bolts, and other fasteners for damage and
tightness. If required, tighten them to the specified torque.
For more information, see
.
•
Check the oil level in the gearbox (PTO-drive models). If
required, top-up the oil. For instructions, see
•
Check for entangled material. Remove all entangled material
before resuming work.
•
Check the tire pressure. If required, inflate the tires to the
correct pressure.
After 10 hours of operation:
1.
Repeat the
after 1–5 hours of operation
checks.
2.
Complete the maintenance tasks that are specified in the
Summary of Contents for MS250G
Page 44: ...BUSH HOG...