Bush Hog HT419H, Operator'S Manual

Page: 34 / 84

ASSEMBLY
HT419H 05/22 Assembly Section 3-6
© 2022 Alamo Group Inc.
ASSEMBL
Y
STEP “B”
Attach drawbar (1) to the machine body (2) with pin
(3) into the holes (5) of the machine body (2) and
drawbar (1) [passing pin (3) through hole (4) of the
machine body (2)]. Fasten pin (3) with bushing 6
and split pins 7.
In this step, you will use:
Item 6, two bushing ø20.5/30x12 (ø0.8-1/2”x 0.47)
Item 7, two split pins ø5 x 40 (ø0.2” x 1.57”)
STEP “C”
Attach grease fitting (1) to the pin and fork of the
crank assembly (2). Insert the pin of the crank
assembly (2) into its seat in drawbar (3), inserting
the spacers (4). Fasten in place with split pin (5).
Fasten the fork of the crank assembly (2) at the
hole (6) using pin (7) and split pins (5).
In this step you will use:
Item 1, three grease nipples M6
Item 4, two shims 30.5 x 39.8 x 1 (1.2” x 1.57” x
0.04”)
Item 5, three split pins 5 x 40 (0.2” x 1.57”)
Item 7, one pin 20 x 66 (079” x 2.6”)