![background image](http://html1.mh-extra.com/html/bush-hog/ghm-1800-series/ghm-1800-series_operators-manual_2834694021.webp)
of front and rear curtain support.
Q. Fasten transport latch to curtain support
beam using a 5/8 x 1-3/4” bolt and locknut. Pin
opposite end in place with faspin.
R. Install curtain stop weldment flush with end of
curtain support beam using one 5/8” U-bolt, lock-
washer, flatwashers and nuts.
Vent Plug
Butt End
Cylinder
Elbow
Figure 5-2 Hydraulic Hose Restrictor
Figure 5-1 Assembly
Cutter Bar
Helper Spring
Beam Spring
Cushion
Hitch
Assy.
Parking
Stand
Cylinder
Curtain
Transport
Latch
Breakaway Assy.
Beam
Gearbox
Dirt Shield
Tube
Clip
Curtain
Support
Curtain Support
Beam
Swath Board
Curtain Stop
Weldment
Crop Divider
Curtain Adjustment Chain
Cylinder
Lug
20