![background image](http://html1.mh-extra.com/html/bush-hog/bh200-series/bh200-series_operators-manual_2834789148.webp)
MAINTENANCE
BH200 Series 08/20
Maintenance Section 5-6
© 2020 Alamo Group Inc.
MAINTENANCE
MAIN & JACKSHAFT DRIVELINE SHIELDS
To remove the main inner driveline shield, Remove the locking screws. Align the bearing tabs with the cone
pockets.
FIGURE Mnt-0026.
Remove the half-guard and remove the bearing ring.
FIGURE Mnt-R-0012.
Inspect the driveline shield for worn areas or cracks. If the shield has any dents or cracks, replace the Shield.
While the Shields are off, examine the Driveline for signs of abnormal wear, bent or twisted shafts, or cracks in
the shafts or tubes. Check to see that the Drivelines telescope easily. If the Drivelines do not telescope
properly or show signs of abnormal wear, the shaft should be repaired or replaced.
To assemble the main inner driveline shield, grease the yoke groove and inner profile tube. Attach the bearing
ring in groove with recesses facing profile tube.
FIGURE Mnt-0027.
Slide on the half shield. Turn the cone until
it engages correctly. Install locking screws.
FIGURE Mnt-0028.
IMPORTANT!
Check
that
Guard
Missing
decal
on
steel
tube
under
inner
guard
and
Rotating
Driveline
Decal
are
firmly
affixed, undamaged
and readable. If not,
replace.
Summary of Contents for BH200 Series
