![background image](http://html1.mh-extra.com/html/bush-hog/bh200-series/bh200-series_operators-manual_2834789039.webp)
7
Follow A Safety Program
Be Alert!
Know where to get assistance. Know how to use a fi rst
aid kit and fi re extinguisher/fi re suppression system.
Be Aware!
Take advantage of training programs offered.
Be Careful!
Human error is caused by many factors: carelessness,
fatigue, overload, preoccupation, unfamiliarity of operator
with the machine, drugs, and alcohol to name a few.
Damage to the tractor or mower can be fi xed in a short
period of time, but injury, or death, has a lasting effect.
For your safety and the safety of others, encourage your
fellow workers to act safely.
For Safe Operation
You must be a qualifi ed and authorized operator for
proper operation of your machine. You must clearly
understand the written instructions supplied by the
manufacturer, be trained—including actual operation of
the mower—and know the safety rules and regulations
for the worksite. It is a good safety practice to point
out and explain safety signs and practices and ensure
others understand the importance of following these
instructions.
WARNING!
Drugs and alcohol affect an operator’s
alertness and coordination and the operator’s ability
to safely operate the equipment.
Never use drugs or
alcohol while operating the mowing equipment.
Never knowingly allow anyone to operate this
machine when their alertness or coordination is
impaired.
An operator taking prescription or over-the-
counter medication must consult a medical professional
regarding any side effects of the medication that would
hinder their ability to safely operate this equipment.
Never Use Drugs
or Alcohol While
Operating
Follow A Safety Program
Know The Rules
Most employers have rules governing operation and
maintenance of equipment. Before you start work at a
new location, check with your supervisor or the safety
coordinator. Ask about the rules you will be expected
to obey.
The Occupational Safety and Health Administration
(OSHA) enforces federal laws within the United
States that apply to safe operation, application and
maintenance of equipment on a worksite. It is the
employer’s responsibility to comply with these laws.
An OSHA representative may periodically inspect a
worksite to see that these laws are being followed.
There may also be local or state/provincial laws or
international regulations that apply to this equipment
and its use, along with specifi c worksite or employer
rules. It is important that you know and comply with
all applicable laws and rules, including those requiring
operator training and certifi cation.
These are some of the rules you must work by:
— A ROPS and seat belt-equipped tractor is a federal
government (OSHA) requirement for operator
protection during mowing operations. An enclosed
cab provides additional operator protection from
thrown objects. Check your mower operator's manual
to see if a tractor cab is also required.
— Wear and check that others are wearing proper
clothing and personal protective equipment.
— Inspect your machine and attachments before each use
as specifi ed by the manufacturer and your employer.
— Know the limitations and operating characteristics of
your mowing equipment. Do not misuse it.
— Have all provided shields and guards properly
installed before operating the machine.
— Never modify or remove any part of the machine
(except for service—then make sure it is replaced).
Safety Rules
•
•
•
•
•
•
•
•
•
•
Know and
Understand
Rules of
Operation
Summary of Contents for BH200 Series
