p
ossible
operation
failure
prevention
•
If the cordless drill is making TRRRRRRRRRRRRR sound make sure that the cordless
drill machine is in drilling option ( not the screwing option )
•
If the Falz Cutter is not going forwards and is jammed
, then possibly metal profile
is thicker than 9 mm
•
If the cordless drill gets hot and can’t withstand the load then possibly metal
profile height is above the maximum allowable height
•
Make sure you’re not using impact driver!
C
are
,
maintenanCe
and
storage
of
FALZ CUTTER
•
Always make sure the battery is disconnected from the cordless drill and only
then clean the tool!
•
Clean the device every time after using it.
•
Clean FALZ CUTTER from moisture, dust and sand.
•
Always keep gears clean.
•
Keep the rotary parts free from dust, sand and moisture.
•
Check all screws periodically.
•
It is strictly forbidden to put and keep a wet or damp FALZ CUTTER in a case.
W
arranty
We guarantee that all FALZ CUTTER is made of high-quality materials and does not have
any manufacturing defects. In case your device turns up the following defects, we will
eliminate them in accordance with the law free of charge. Therefore, we give 1 (one)
year limited warranty on our tools from the date of invoice. Limited warranty applies
only to first sale. You must contact the company that has sold the product to file claims.
Be sure that You have the purchase document! The device must be delivered for repair
in a complete set.
If FALZ CUTTER is repaired by an unqualified person, we can no longer guarantee the
quality of the device. Also, we can not guarantee the quality of the device if:
•
the tool is mechanically damaged, dropped off or otherwise broken;
•
have been used on incorrect working methods;
•
have been used with unsuitable accessories;
•
the tool is used for unforeseen purposes;
•
the tool is used after detection of a defect;
•
the tool used by a person without the necessary skills;
•
the tool was uncared for;
•
the construction and parameters of the tool have been changed.
The FALZ CUTTER is a complex combination of mechanical parts and has a lot of moving
and wearing off parts. Wearing off parts is a normal phenomenon, not a production
defect. In result of normal usage,worn parts will not be exchanged for free. Make sure
the Device Model and Serial Number and Date of Purchase are correctly marked on the
Purchase Document.
ENJOY YOUR FALZ CUTTER
