manualshive.com logo in svg

BUSCH PANDA WZ 2400 A, Instruction Manual, Page: 22 / 28

Share
Download
BUSCH PANDA WZ 2400 A Instruction Manual Download Page 22

10 | Spare Parts

22 / 28

0870203784_WZ2400A_-0001_IM_en

9.1 Dismantling and Disposal

• Drain the oil.

• Separate special waste from the machine.

• Dispose of special waste in compliance with applicable regulations.

• Dispose of the machine as scrap metal.

10 Spare Parts

NOTICE

Use of non-Busch genuine spare parts.

Risk of premature failure!

Loss of efficiency!

• The exclusive use of Busch genuine spare parts and consumables is recommended for

the correct functioning of the machine and to validate the warranty.

There is no standard spare parts kits available for this product, if you require Busch gen-
uine parts:

• Contact your Busch representative for the detailed spare parts list.

11 Troubleshooting

DANGER

Live wires.

Risk of electrical shock.

• Electrical installation work must only be executed by qualified personnel.

CAUTION

Hot surface.

Risk of burns!

• Prior to any action requiring touching the machine, let the machine cool down first.

Summary of Contents for PANDA WZ 2400 A





























Reviews:

No comments