Maintenance | 8
Instruction Manual MINK MB 0018 A_EN_en
29 | 44
NOTICE
Cleaning the surface.
Risk of damage to the machine!
●
Do not use any solvant or liquid. Use only clean and dry paper or tissue!
●
Remove the existing O-Ring carefully to avoid damaging the groove.
●
Make sure there is no burr on machined surfaces (chamfer, groove, flange surface, etc.).
●
Peel the label off (located on the backside of the motor). Do not use temperature higher than
100°C to help removing the label.
●
Clean up the surface.
