Commissioning | 7
Instruction Manual MINK MB 0018 A_EN_en
19 | 44
Plausibility check
A blocked rotor cannot be detected under all conditions by an overcurrent detection. Therefore, an
additionally plausibility check is implemented.
The plausibility check checks different ratios inside the motor controller. If a plausibility check error
occur the motor stops immediately and the bit 5 “plausibility error” in the CAN Status frame is set.
The timing for the error bit and the restart is identical to the overcurrent protection.
Electronic limits
Status and diagnostic
Bit number
Limit
Wrong voltage
4
24 V motor
►
35 V
Temperature limit
6
130 … 145 °C
►
rotation speed decrease
>145 °C
►
motor off
Overload
6 and 7
700 W
