BUSCH COBRA NC 0300 B, Instructions Manual, Page: 19 / 44

Custom Parametrisation | 6
Pump Control Instructions INVEOR VFD R5 COBRA_EN_en 19 | 44
6.3 Reload Factory Settings
●
Make sure that the machine is disabled, see Disable the Machine [
➔
16].
●
Connect the variable speed drive to the computer with the provided cable.
●
Start the PC-Software previously installed, see PC-Software Installation [
➔
7].
●
Select “Open” to load the file “.inveor” of your parameter list.
●
Click on “Write”.
●
Select the communication port of the cable (usually never COM1)
●
Press “OK”