7
After having found a suitable position for the monitor in the vehicle you can mount / attach the the
installation pad / the holder accordingly. Please use a cleaning cloth for degreasing the surfaces you
want to attach the installation pad to.
The end of the cable with the small Molex plug is ideally suited for placing through small openings in
the dashboard area. This facilitates a practically invisible installation of the cable. Take the length of
the cable into account and make sure that it is of sufficient length to reach the intended location of the
electronics box.
Important:
When positioning the monitor please take care that the monitor does not impair the
X
view onto the road, that it will not be installed in the impact zone of the passenger
compartment (amongst others in the airbag inflation zones) and that cables may be laid
without any problems.
The installation pad can be affixed just once, removing could damage the adhesive
X
area. In case of high variations in temperatures - depending on the structure and the
features - decolourisations of the surfaces can occur during the subsequent utilization.
Please avoid direct sunlight on the monitor or high internal temperatures, which can be
X
rapidly reached in parked vehicles. In such cases, remove the monitor of the hands-free
car kit from the cradle and put it in the car glove pocket or glove box for instance.
Example of installation:
1
2
3
4
5
6
