12
Installation of the hands-free car kit
Version 2:
Refer to separate chapter: Installation of the audio switch box
AC 5120
Connection 4 - Speaker output
Version 1:
This jack remains unused. Alternatively, if the integrated audio switch
box is not used, it is possible to plug the 3.5 mm jack plug from the
external BURY speaker in here (available as an accessory).
Version 2:
Refer to separate chapter: Installation of the audio switch box AC
5120
Connection 5 - Microphone input
This is where you plug in the microphone jack. After connection 4 has
already been occupied use the rider. This ensures that neither of the
jacks is able to loosen as a result of vibrations.
Connection 6 - LINE-OUT
Stereo music is output at connection 6. Here you can connect the AUX-
In input of your radio (if existent) via adapters available at local retai-
lers. For the connection to the hands-free car kit, the adapter must
have a 3.5 mm stereo jack. Depending on the car radio, the other end
must be selected otherwise. If your radio does not have an AUX-In, you
can use the car CD/MP3 adapter from the BURY accessories programme
to enable the reproduction of music via your radio.
Connection 7 - Monitor (Multifunction display)
Please plug the small Molex plug, which comes from the holder of the
monitor, into this connection. When installed correctly, the small plastic
catch above the plug clicks into place automatically. This prevents the
connection from falling out due to vibrations.
