25
The last menu item in the Bluetooth menu is the Multipoint function. This function can only be acti-
vated if at least two mobile phone signatures are included in the list of telephones. Otherwise the
function is not available and the selection field during operation via the Touch screen is inactive.
Using the Multipoint function, you can operate two mobile telephones on the HFCK in hands-free mode
at the same time. The primary mobile phone takes priority, which means that only its telephone books,
call lists, voice memos, SMS and possible emails are loaded and ready in the memory of the HFCK. This
is similar to the situation as though only one mobile phone were connected with the HFCK. If a call is
received on the secondary mobile phone, this call will also be handled via the HFCK. The display in-
forms you accordingly as to which mobile is receiving the call (the first / second telephone).
If a call is received by both mobile phones at the same time, preference is given to the primary mobi-
le phone. You will be displayed the incoming call on the other mobile after accepting or declining the
first call. You are then able to end the first call at short notice and to also decline the second call (pres-
sing to the right of the red receiver both times), or to end the first call and to accept the second call
directly (press the symbol on the left). Holding the first call isn’t possible, as the calls are not being
made on the same telephone number. The conference mode which is described in the instructions
below is not possible between the two mobile phones.
If two or more mobile phone signatures are saved and the Multipoint function is activated, then the
mobile phones will be sought and connected in the order in which they are listed in the telephones list
– position 1 and position 2. In addition to the first telephone that is connected, you will then also be
shown the second telephone in the main menu.
If a number of signatures from different mobile phones have been saved (from several different dri-
vers) it may be the case that their order does not suit your requirements. To be able to define both
telephones and their order for the multipoint function, you can set one mobile phone as standard (as
telephone 1) and another mobile phone as telephone 2. If you do not set the second telephone then
the HFCK will complete a full search of the telephones list twice over. If the HFCK does not find a se-
cond active telephone (because the Bluetooth function has not been activated, for instance), you must
either connect the second telephone manually via the telephone list, or deactivate the multipoint func-
tion and then activate it again.
