23
If a call is received by both mobile phones at the same time, preference is given to the primary mobile
phone. You will be displayed the incoming call on the other mobile after accepting or declining the first
call. You are then able to end the first call at short notice and to also decline the second call (pressing
to the right of the red receiver both times), or to end the first call and to accept the second call di-
rectly (press the symbol on the left). Holding the first call isn’t possible, as the calls are not being made
on the same telephone number. The conference mode which is described in the instructions below is
not possible between the two mobile phones.
If two or more mobile phone signatures are saved and the Multipoint function is activated, then the
mobile phones will be sought and connected in the order in which they are listed in the telephones list
– position 1 and position 2. In addition to the first telephone that is connected, you will then also be
shown the second telephone in the main menu.
If a number of signatures from different mobile phones have been saved (from several different driv-
ers) it may be the case that their order does not suit your requirements. To be able to define both
telephones and their order for the multipoint function, you can set one mobile phone as standard (as
telephone 1) and another mobile phone as telephone 2. If you do not set the second telephone then
the HFCK will complete a full search of the telephones list twice over. If the HFCK does not find a sec-
ond active telephone (because the
Bluetooth function has not been activated, for instance), you must
either connect the second telephone manually via the telephone list, or deactivate the multipoint func-
tion and then activate it again.
Note:
Please follow regulations of the country in which you reside, concerning calling in the
X
car.
To use voice dialing (Voicetags) in your phone with the HFCK, you need to determine
X
the appropriate phone numbers in your phone.
