Burroughs
ReceiptNOW
TM
User Manual
- 15 -
5.2 Clean Print Head and Roller
– Once Per Month
Steps for cleaning print head and rubber covered roller are as follow s:
1) Turn off power. Open front cover.
2) Wait approximately 5 minutes until the print head is totally cooled down after printing.
3) Wipe out stains and dust on print head and rubber covered roller with isopropyl alcohol or ethanol
soaked and wrung-out cotton cloth. Burroughs suggest use of either isopropyl alcohol based
thermal printing cleaning swab (Part number 751920912) or ethanol based thermal printing cleaning
swab (Part number 757300999)
4) Do not close front cover until isopropyl alcohol or ethanol evaporates.
5.3 Clean Paper Sensor
If ‗out of paper‘ error is not reported correctly, you should clean paper sensors. Cleaning steps are as
follows:
1)
Turn off power.
2)
Open front cover. Remove transparent cover plate over sensors (shown in bright pink below).