Burntech Wood Fired Outdoor Oven, Installation, Operation, Maintenance And Owner'S Manual, Page: 8 / 12

8
Assembly Instructions - Table Top Continued
Step 10:
Assemble the other Dome Side. The beveled face
lines up with the inward angles of the Front and Rear
Dome sides. If things are proceeding as they should be, the
finished top surface should be flat and level. (Figure 9)
Step 11:
Set the Dome Top into position. (this will take two
people to do) Be sure that it is flush in every direction as
you place it on the crest of the dome wall assembly.
(Figure 10)
Note: The chimney hole on the Dome Top is not centered
from front to back - it should be offset closest to the front
of the oven.
Figure 10
Figure 9