Burntech Wood Fired Outdoor Oven Installation, Operation, Maintenance And Owner'S Manual Download Page 1 | Manualshive

Page: 1 / 12

Burntech Wood Fired Outdoor Oven Installation, Operation, Maintenance And Owner'S Manual Download Page 1

1

Wood Fired

Outdoor

Oven

Installation,

Operation, Maintenance and Owner’s Manual

A Product of

Burntech Fireplace Solutions

Important: This manual contains assembly rules, installation steps, and guidelines, for use and
maintenance instructions for the Wood Fired Oven. This manual must become the property of and to be
reviewed by all current and future users of this product. It is the responsibility of the installer of this
product to ensure that the instructions in this manual are followed exactly. It is the responsibility of the
general contractor and the installer to provide adequate clearances from all Wood Fired Oven surfaces
as specified in this manual.

INSTALLER: Leave this manual with the appliance

CONSUMER: Retain this manual for future reference

Be Sure to Read Entire Manual Before Beginning Construction.

Contents of this manual may change without prior notification.

THIS Wood Fired Oven Is Designed for Outdoor Use Only

with SOLID WOOD LOGS

FOR OUTDOOR USE ONLY

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result
causing property damage, personal injury or loss of life.

1
2
3
...
»

Summary of Contents for Wood Fired Outdoor Oven













Reviews:

No comments