Burndy PAT81KFTLI Safety Operating & Maintenance Instructions Download Page 15

15

LITHIUM ION (Li-ion) SHIPPING REGULATIONS

:

Check with all organizations for current shipping 

regulations pertaining to Lithium Cells and Batteries 

prior to shipping. Review all country specific regulations 

on safe handling and shipping of Lithium Cells and 

Batteries prior to shipping. Organizations include:

US Department of Transportation (DOT) 49CFR  

173.185 Lithium Cells and Batteries

International Civil Aviation Organization (ICAO)       

Dangerous Goods Technical Instructions on Lithium 

Batteries

International Air Transport Association (IATA)                     

Dangerous Goods Regulations on The Transport of 

Lithium Ion and Lithium Metal Batteries

International Maritime Dangerous Goods (IMDG)     

Code 38-16 Lithium Batteries

When recycling batteries you must include a bill of lading 

in order to comply with all applicable state and federal 

requirements, or the recycling center may be forced to 

return the shipment at your expense.  If you have any 

questions, please contact the recycling center directly.

The EPA certified RBRC Recycling Seal indicates 

BURNDY

®

 

is voluntarily participating in a program to recycle these 

batteries at the end of their useful life.  The RBRC program 

provides a convenient alternative to placing batteries 

into the trash, which may be illegal in your area.  Please 

call  1-800-822-8837 

for more information.  

BURNDY

®

 

is committed 

t o   p r e s e r v i n g   o u r 

e n v i r o n m e n t   a n d 

conserving natural 

resources.

• Used batteries may have a significant residual charge.  It 

is important that they are prevented form short-circuiting.  

This can be done by placing the batteries separately in 

plastic bags or by placing non-conductive tape over the 

battery terminals.

•  While these batteries are normally safe to handle, they do 

contain caustic materials that may have "vented" due to 

misuse during the life of the battery.  If the battery appears 

to be "dirty" or have a white "film-like" substance around 

the terminal, exercise caution when handling the battery.  

Do not touch the dirty area.  Wash your hands with soap 

and water if they feel itchy, and avoid touching your eyes, 

nose, mouth.

• Do not attempt to discharge the battery by short-circuiting 

the terminals,  consult your battery supplier for proper 

instructions on discharging batteries.

• Do not bite, or place the battery in your mouth or nose.
• Do not place wet batteries in a plastic bag.  The trapped 

moisture will cause the battery to rust.

SAFETY GUIDELINES FOR BATTERY COLLECTION

Li-ion BATTERIES

BURNDY

®

 encourages recycling of its products whenever 

feasible. Recycling regulations and methods vary within 

North America and BURNDY

®

 does not endorse any one 

recycling method or company. Consumers that wish to 

recycle BURNDY

®

 products in North America are asked to 

do so according to your local, state and federal regulations. 

Recycling resources for the United States can be found at 

the US EPA web site at the following link:

http://www.epa.gov/recycle

If you wish to recycle batteries please use the above 

link and/or contact your local RBRC recycling center. 

If additional information is needed please contact the 

BURNDY

®

, Littleton Tool Service Center.

Approved Battery Recycling Location:

Summary of Contents for PAT81KFTLI














































Reviews: