3 1 | 3 4
B C 1 5 0 L O U D S P E A K E R
Adjusting the Ambience Level
The BC150 has an additional, rear-facing AMT tweeter chassis. You can
adjust the level of this (the ambience level) to suit your preferences using
the control on the back of the loudspeaker. This will improve the spatial
sound. The ambience effect is influenced by both the speakers’ installation
positions and the acoustic qualities of the surrounding surfaces.
THE CONTROL DIAL FOR THE REAR-FACING AMT TWEETER CHASSIS IS
LOCATED ON THE CONNECTION PANEL BEHIND THE TERMINAL COVER.
1.
Open the BC
150
’s terminal cover by reaching into the opening and pulling the cover
towards you. The terminal cover is held in place by magnets.
2.
Using the control dial (
6
), adjust the ambience level to suit your preferences.
3.
Replace the terminal cover.
s
CAUTION:
RISK OF BRUISING
$
During insertion, always grip it using only the bottom opening
in order to avoid bruising.
4.
Repeat Steps
1
to
3
for the second loudspeaker.
Summary of Contents for BC150
