2 4 | 3 4
O P E R A T I O N M A N U A L
Connecting the Loudspeakers
Speaker Cables
SPEAKER CABLES
Burmester recommends using cables with a large cross-section to connect the
loudspeakers to the power amplifier. A large cross-section allows you to maintain the
damping factor of the power amplifiers for optimal control of the loudspeakers. The best
results are achieved by using original Burmester speaker cables, which have the same
electrical and tonal characteristics as the internal wiring of Burmester loudspeakers and
amplifiers. These cables have been optimised and tested for use with our loudspeakers.
r
ATTENTION
The insulation on your selected speaker cable must match that of the original
Burmester loudspeaker cable and must have a flame rating of at least VW-1.
$
Please contact the manufacturer or your dealer for details.
Before connecting the loudspeakers, please also read the operation manuals
for the components you plan to connect.
Pay attention to the correct polarity: red = positive, black = negative
r
ATTENTION:
INCORRECT CONNECTION CAN LEAD TO
DAMAGE!
$
A short circuit or a faulty connection can damage the loudspeakers and other
components.
Summary of Contents for BC150
