Burmester BC150, Operation Manual, Page: 21 / 34

2 1 | 3 4
B C 1 5 0 L O U D S P E A K E R
Adjusting the feet

ARRANGE FOR A SKILLED PERSON TO CARRY OUT THIS STEP!
In order to ensure stability, the loudspeakers must be kept straight
and level. In order to achieve this, the feet attached to the speaker
can be adjusted using the hook wrench provided.
$ Use the spirit level provided to check that the speakers are aligned correctly.
1.
Slide the hook wrench between the base plate and the floor as shown above.
Hook it in place depending on the direction in which you want to make the
adjustment.
2. Use the wrench to adjust the foot as required.
3.
Repeat this procedure on the other feet until the speaker is straight and does not
wobble. Take care not to unscrew the feet any further than necessary.
4. Place the spirit level provided on top of the loudspeaker. Adjust the feet accordingly
until the air bubble is exactly in the middle of the spirit level.
SPIRIT LEVEL BALANCED CORRECTLY
R
INSERT WITH CURVE
FACING RIGHT
TO RAISE INSERT WITH CURVE
FACING LEFT
TO LOWER